Gen2Wave RP1100


Richiedi preventivo

Gen2Wave RP1100

NUOVO SMARTPHONE INDUSTRIALE con WINDOWS MOBILE 6.5

ESSERE IL PRIMO E’ MEGLIO…

 

 

– Design compatto e leggero
– display touch da 3.5″ QVGA o VGA
– Processore potente e veloce da 1 Ghz
– Supporto 3G HSPA+
– Scocca estremamente robusta (con protezione in gomma e frame in magnesio)
– Display leggibile alla luce del sole
– Altissima precisione e velocità dell’antenna GPS integrata (in ceramica)
– lettore barcode professionale 1D e 2D
– Batteria ad alta capacità opzionale (4000mAH)
– batteria di backup da 200mAh che consente la sostituzione a caldo della batteria principale senza attesa di riavvio del dispositivo

Item Description
CPU Samsung S5PV210 1GHz
OS Windows®Embeded Handheld 6.5.3 (Android 4.1.2 optional)
Memory 256MB SDRAM (512MB optional) 1GB ROM
Dimensions 139mm H X 73mm W X 21mm D
Weight 270 gram with 1860mAH battery
315 gram with 4000mAH battery
Display 3.5inch. QVGA (VGA optional)
Input Navigation Key, Function Key
Battery Standard : 1860mA/h Li-Ion
Extended : 4000mA/h Li-Ion
Built-in backup battery : 200mA/h (Li-polymer)
Expansion Slot micro SD Card
Sealing IP64
Drop Spec. 1.5M drop to concrete,
2 drops per 6 sides
Operating Temp.
Storage Temp.
-20℃ ~ +60℃
-30℃ ~ +70℃
Communication
Interface
USB HOST 2.0 Full speed
USB Client 2.0 High speed
Ext. Serial RS232C
Audio Speaker / Receiver / MIC
Wireless(WWAN) GSM / GPRS / EDEG : Quad band 850/900/1800/1900 MHz
UMTS / HSPA+ : Five band 800/850/900/1900/2100 MHz
Wireless LAN 802.11 b/g/n (a/b/g optional)
Bluetooth Bluetooth V2.1 (Intenna, BT Headset support)
GPS Embedded A-GPS (Stand alone)
Notification Vibration and Charging LED, WWAN LED
Camera 5.0M Auto Focus, Flash
Scanner 1D Laser
2D Imager
Accessory Charging Cable, 1Slot Cradle, Vehicle Cradle
Performance Characteristics
CPU Samsung S5PV210 1GHz
OS Windows®Embeded Handheld 6.5.3 (Android 4.1.2 optional)
Memory 256MB SDRAM (512MB optional) 1GB ROM
Communication
Interface
USB HOST 2.0 Full speed
USB Client 2.0 High speed
Ext. Serial RS232C
Battery(4000mA) Performance
Standby Time 220 hours
Talk Time 8 hours
User Profiles Outdoor WAN+GPS, 15min/hour voice communication, 10kB transmission every 10 min, and GPS on all time, 8.5 hours of operation.
Outdoor Voice, 15 min/hour voice communication, 8.5 hours of operation and 150 hours standby time.
Physical Characteristics
Dimensions 139mm H X 73mm W X 21mm D
Weight 270g (including standard Battery)
Display 3.5inch. QVGA (VGA, optional)
Input Navigation Key, Function Key
Battery Standard : 1860mA/h Li-ion
Extended : 4000mA/h Li-ion
Build-in backup battery : 200mA/h (Li-polymer)
Expansion Slot High capacity micro SD Card
Audio Speaker / Receiver / MIC
Wireless (WWAN) GSM / GPRS / EDEG :
Quad band 850/900/1800/1900 MHzUMTS / HSPA+ :
Five band 800/850/900/1900/2100 MHz
Bluetooth EDR V2.1 (Intenna, BT Headset support)
Wireless LAN 802.11 b/g/n (a/b/g optional)
GPS Embedded A-GPS
Notification Vibration and Charging LED, WWAN LED
Scanner 1D Laser Type, 2D Imager
User Environment
Sealing IP64
Drop Spec. 1.5M drop to concrete.
2 drops per 6 sides
Operating
Temp
Main -20℃ ~ +60℃
Adapter 10℃ ~ +50℃
AC Power Input : AC 100 ~ 240V, 50 ~ 60Hz
Output : DC +5.0V, 3.5A
Relative Humidity 5% ~ 93%
Used frequency band GSM / GPRS / EDEG :
Quad band 850/900/1800/1900 MHzUMTS / HSPA+ :
Five band 800/850/900/1900/2100 MHz
Camera
Resolution 5.0 megapixel
Illumination User controllable flash
Lens: Auto Focus
Regulatory
Environmental RoHS-compliant
Electrical Safety IEC 60950-1 : 2005 (2nd Edition) and/or EN 60950-1:2006
WLAN & Bluetooth ETSI EN300328 : V1.7.1(2006-10)
EDGE/GSM 900/
DCS 1800
3GPP TS 34.123 GCF approved module
ETSI EN301 511 : V.9.0.2(2003-03)
ETSI TS 151 010-1 : V7.9.0(2008-04)
HSDPA ETSI EN 301 908-1&2 : V.3.2.1(2007-5)
3GPP TS 25.102 V8.0.0 (2008-05)
RF Exposure EN 60950-1 : 2006+A11 : 2009 ,
EN50360 : 2001, EN62209-1 : 2006 and IEEE1528-2003
EMI/RFI ETSI EN 301 489-1 V1.8.1(04/2008)
ETSI EN 301 489-7 V1.3.1(11/2005)
ETSI EN 301 489-V1.3.1(04/2008)
ETSI EN 301 489-24 V1.4.1(09/2007)
Laser Safety IEC 60825-1 : 1993+A1 : 1997+A2 : 2001,EN 60825-1 : 1994+A2 : 2001+A1 : 2002 “Safety of Laser products”
1D Laser Scanner (IS4813)
Signal Output Digital, industry standard
Resolution: 5 mil (0.127 mm)
Roll: 42°
Pitch Angle: 68°
Yaw 52°
Light Source Visible Laser Diode 650 nm
Scan Rate 100 scan lines per second
Sweep Angle 54°minimum
Typical Performance*Narrow Width 5.2 mil 70 mm – 95 mm (2.8˝ – 3.78˝)
7.5 mil 57 mm – 171 mm (2.3˝ – 6.8˝)
10.4 mil 50 mm – 210 mm (2.0˝ – 8.3˝)
Depth of Field 13 mil 50 mm – 254 mm (2.0˝ – 10.0˝)
19.5 mil 75 mm – 300 (3.0˝ – 11.8˝)
Ambient Light Levels 4842 Lux (450 foot-candles)
* Performance may be impacted by bar code quality and environmental conditions
Interactive Sensor Technology
Motion-sensor: 3-axis accelerometer that enables motion-sensing applications for dynamic screen orientation,
and Magnetic Field Sensor, power management and free-fall detect.
2D Imager Engine (5100SR-110R)
Focal Distance 7 inches (17.8cm) from lens plate
Sensor Resolution 752 x 480 pixels
Image Sensor 752 X 480 CMOS sensor
Motion Tolerance 4 in. (10.2cm) per second
Rotational Sensitivity 360o
Viewing Angle +40o
Ambient Light
Immunity
Total darkness to 100,000 lux(full sunlight)
Illumination LEDs 626nm +30nm
Aiming LEDs : 526nm +30nm
Laser : 650nm +10nm
Peripherals and Accessories
Communication USB Client 2.0 HIGH SPEED
Battery Chargers: 1-slot battery charger Cradle
Vehicle Chager Cradle
4-slot Charging Cradle
Electrical Safety: IEC 60950-1 : 2005 (2nd Edition) and/or EN 60950-1:2006
EMI/RFI: EN 55022 : 2006 Class B
EN 61000-3-2 : 2006
EN 61000-3-3 : 1995 +A1 : 2001+A2 : 2005

– Standard battery 1860 mA Li-ION

– Extended battery 4000 mA Li-ION

– Battery 2,860mA Li-ION with Smart card reader

– Battery 4,000mA Li-ION with Smart card reader

– Desktop cradle with USB Type A and B

– Desktop cradle with USB Type A and B, and Ethernet

– Power supply for single-slot desktop cradle

– USB cable type B to type B

– Multi- gender for Auto-charge, Direct cable charge, USB and Ear-phone connection

– Multi- gender for Auto-charge, Direct cable charge, Ethernet and Ear-phone connection

– Direct auto charger from cigarette lighter to RP1000. Require Multi-gender

– Direct auto charger Kit (from cigarette lighter to RP1000) (Charging only, No USB, Ethernet, Ear phone Jack)

– Vehicle Cradle Charging only with suction fixation kit

– Vehicle Cradle Charging & RS232 connection with suction fixation kit

– Holster with clip belt

– Leather protection case with hand and shoulder strap

– Stylus

– Coiled String

– Screen Protector

– 4 slot cradle for charge with power supply

– Ethernet 4 slot cradle with battery pack and power supply

– Serial Cable Adaptor (Male)

– USB Cable Adaptor (Host)

Scheda tecnica PDF: Gen2Wave RP1100